Heavy Duty Wrecker Supply
Lifting forks, adapters, fork extenders, and heavy duty tire lifts will complete your heavy duty truck supplies making you safer for every day work. The Wheel Duck 3.0 Heavy Hauler Lift Sling is a must have and only available at Stephens Truck Center. Lift an additional 17,600 lbs per tire! Attaches to the studs!
The Miller Drum Set Screw is a crucial component meticulously engineered to ensure secure fastening...
This is a replacement 2" control lever pressure gauge by Miller Industries. This gauge has...
Ensure the durability and performance of your towing equipment with the Miller Flat Washer. Designed...
The Miller Control Station Gauge Fluid Tube is a specialized component designed to facilitate accurate...
On Order
This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x...
The Miller D.C.V (Directional Control Valve) Rear Panel is a crucial component meticulously designed to...
Introducing the Miller Industries Screw, an essential component for your towing and recovery needs. Precision-engineered...
Introducing the Miller Control Rod Weldment, a fundamental component engineered to optimize control and precision...
The Miller Fastenal 5/16" - 18x1" Stainless Steel Button Head Cap Screw is a specific...
The Miller Flat Head Socket Cap Screw, sized at 5/8-11 x 5", is a critical...
The Miller Control Panel ID 5 Function Gen 2, RH (Right Hand), is a sophisticated...
The Miller Crossbar Extension Pin is a specialized component designed for extending the reach and...
The Miller DP Winch Pin Pivot Cable Hold Down is a specialized component designed to...
The Miller Extended Cylinder Shaft is a specialized component designed to provide additional reach or...
The Miller Control Panel-Left Gen2 (New) is an advanced control interface designed for use in...
Sale
On Order
The Miller Century Control Knob in black is a crucial component that offers precise control...
The Miller D.C.V. (Directional Control Valve) Front Panel Weldment is a key component used in...
Sale
The Miller Chevron LCG Nylatron Outer Wear Pad, sized at 1/2" x 2" x 4"...
Sale
The Miller Crossbeam Pivot Pin, measuring 3-1/4 inches, is a critical component used in various...
On Order
The Miller Extend Cylinder Pin (7035 U/L) is a critical component designed for use in...
On Order
The Miller Extension Stand is a pivotal component utilized in various towing and recovery setups,...
The Miller Crossbar Pivot Pin Assembly 4K is a crucial component within towing and recovery...
The Miller Control Cable, spanning 96 inches in length, is an essential component within towing...
On Order
The Miller Fold Cylinder Pin is a critical component used in the assembly of towing...
The Miller Century 300 Series Small Sheave with 2-Grooves is a key component designed to...
The Miller Clevis Pin, measuring 5/8" in diameter and 6" in length, is a vital...
On Order
The Convert-A-Ball Hitch System is your answer to multi-needed trailer connections. No more wrenches, no...
The Miller Dual Handle Clutch Crank Arm is a crucial component in the operation of...
Sale
The Miller Control Hood Light is a specialized lighting accessory designed to provide illumination within...
The Miller Century Left Control Station is a specialized component designed for precise control and...
The Miller Crank Bell Winch Control is a specialized mechanism designed to provide precise control...
Sale
The Miller Fastenal Control Station Hood Bolt, often referenced as SS 3/8"-16 x 1", is...
The Miller Gray Control Knob for Underlift is a specialized component designed for use in...
The Miller Control Handle Universal Bracket is a versatile accessory designed to securely mount and...
Sale
The Miller Control Handle X-Rod 3/4" x 20 is a precision-engineered component designed to provide...
The Miller Filler/Breather Cap Assembly is a critical component designed to regulate pressure and maintain...
On Order
The Miller Dynamic Fold Pin 601 is an essential component designed for secure and efficient...
The Miller Control Hood Gen 2 is an advanced control panel designed to streamline and...
On Order
The Miller Eberhard Hanson Latch for Century is a specialized latch mechanism engineered for secure...
Sale
The Miller Crossbar Retainer Pin Assembly for Century 3224 is a vital component designed for...
The Miller Control Handle X-Rod, measuring 3/4" x 17", is a precision-engineered control device designed...
The Miller Flex LED Lamp Kit is an innovative lighting solution designed to provide versatile...
On Order
The Miller Clutch & Yoke for Towing is a specialized component used in towing equipment,...
Sale
This Control Rod End Link from Miller Industries is used on the Control and Crossrod...
The Miller Crossbar Pin for Vulcan 896 is a critical component designed for use in...
On Order
The Miller DP Winch Tensioner Air Bag is a specialized component designed to provide controlled...
On Order
The Miller Chain Basket 2-Way Bolt-On Kit is a specialized accessory designed to enhance the...
The Miller Control Handle Assembly is a critical component of welding equipment, providing welders with...
The FOLD PIN DYNAMIC 701 is a versatile and durable locking mechanism designed for various...
The Miller Cartridge Valve 810710000MTC is an essential component engineered to provide precise control and...
The Miller Claw Pivot Pin GEN 3 Crossbar is a crucial component within towing and...
The Miller Eberhard 1 PT LED Handle is an innovative lighting solution designed to provide...
This driver side pivot-style L-Arm receiver bracket from Miller Industries attaches to the outer crosstubes...
The Miller DP Winch Half Round 13 3/4" Rub Bar is a critical component designed...
This is a replacement control cable for Century and Challenger Heavy Duty Wreckers. This control...
The Miller Claw, Tube Version, designed for the Vulcan 812 GEN. 3, is an integral...
Description The Miller Control Handle is a crucial component of welding equipment manufactured by Miller...
Description A Miller flat head screw is likely a standard flat-headed screw used in various...
Sale
A Miller clevis pin is a type of fastener commonly used in towing and recovery...
Description Miller Industries is primarily known for manufacturing towing and recovery equipment rather than welding...
Description The Miller Industries Cylinder Pin is a precision-engineered component designed to ensure the secure...
Description This is a flange bearing for the outer stinger weldment on the Vulcan 810...
This Die Spring from Miller Industries is used in the assembly of crossbars, outer crosstubes,...
Sale
This is a replacement wheel lift extend cylinder shaft on LCG car carriers by Miller...
DescriptionThis is a Miller crossbeam pivot pin. It measures 3.5". The Miller Crossbeam Pivot is...
Description Cylinder Pivot Pin 812 Gen 3. The Miller Cylinder Pivot Pin is a robust...
Sale
This Wheel Lift Extend Cylinder Shaft from Miller Industries is used in the wheel lift...
Sale
DescriptionThis is a centering crossbar plate for wheel lift on the Vulcan 807, Century 300,...
DescriptionThis Spring from Miller Industries is used in the Winch Clutch Control assembly of several...
DescriptionMiller Industries Mounting Pin for the Heavy Duty D-Ring that can be used on Century,...
Description This is a Miller Industries clevis pin carrier control handle. Features • Measurements: 5/16" x...
Description This 1/2" x 5/8" x 1/2" Flange Bushing from Miller Industries is used on...
Description This washer has been replaced by Part Number 39873. This General Purpose Flat Washer...
Description This Hansen Door Latch from Miller Industries is used on the Body Assembly Toolbox...
Introducing the Miller 1/4" x 1.75" Spring Pin ZP, a versatile and reliable fastening solution...
Sale
Introducing the Miller 0.75" Retaining Ring Shaft, an essential component engineered to ensure secure and...
Sale
Introducing the Miller Boom Stop Plate, an essential component engineered to enhance the safety and...
This 1" Chrome Ball from Miller Industries is used on the Wheel Lift and Retainer...
Sale
Introducing the Miller Cable Clamp for 3/8" Wire, an essential component engineered to secure and...
Sale
This 9" Rubber Strap from Miller Industries is used on the Wheel Lift and Tire...
Sale
Introducing the Miller Button Head Screw, measuring 3/8 inch in diameter and 3/4 inch in...
This 5/8" flat washer from Miller Industries fits the L-Arm receiver bracket on Vulcan 896...
Sale
The Miller Allen Flat Screw, sized at 3/8-16" x 3/4" SHC, serves as a crucial...
The Miller Carrier ID Control Place Card Overlay is a specialized accessory meticulously designed to...
The Miller 3/8-16x1" HEX Head Screw is a crucial fastening component meticulously designed for secure...
This Bearing Pad from Miller Industries is used on the outer boom of wheel lift...
Introducing the Miller Industries Boom Shim, a vital accessory for optimizing your towing and recovery...
Sale
Introducing the Miller Industries Cable Anchor – the cornerstone of secure and efficient towing operations....
Sale
The Miller Boom Extend Cylinder Rear Pin is a critical component specifically designed for Century...
The Miller Adjustable Yoke Winch Clutch Control is a specialized component designed to regulate the...
On Order
The Miller Bed Lock Hold Down, compatible with Century and Vulcan towing equipment, is a...
This 1" NPT Socket Head Pipe Plug is used on the crossbar and outer crosstube...
The Miller 6,000 PSI Flush Mount Gauge is a precision instrument designed for accurately measuring...
Sale
This Adjustable Clevis from Miller Industries is used on the Control Assembly of several Century...
The Miller 1/4" Grease Fitting is a small but essential component used in lubrication systems...
Sale
This 1/16" Thrust Washer from Miller Industries is used on the Underlift Assembly of Miller...
Sale
The Miller Bed Extension Cylinder Pin is a critical component used in the assembly and...
The Miller Cable Tensioner Combo Spring is a vital component used in cable tensioning systems,...
The B/A Products 10' Red Round Sling is a versatile and durable lifting sling designed...
Sale
This Hex Jam Nut from Miller Industries has a 1/2" diameter with 13 threads per...
Sale
The Miller 1-1/4" x 6" Lower Spade Pin is a critical component used in various...
The Miller 3/8-16 UNC x 1" Screw is a threaded fastener designed for various applications...
The Miller Bed Lock Bracket is a crucial component designed to securely fasten the bed...
On Order
The Miller Bell Crank Weldment is a crucial component engineered to facilitate the controlled movement...
The Miller Cable Guide is a key component in towing and recovery equipment, specifically designed...
The Miller Blue Control Knob for Boom/Bed is a specialized component designed for precise control...
The B/A Products 6' Yellow Round Sling is a high-quality lifting and rigging accessory designed...
The Miller 40LB Spool Spring, also known as HYSPECO #572347, is a vital component designed...
The Miller Cable Clip Threaded is a specialized component designed to securely fasten and organize...
The Miller 6 Spool Control Panel Right Side G2 is an advanced control panel designed...
The B/A Products 12' Yellow Round Sling is a durable and versatile lifting sling designed...
The Miller Bolt & Clip for 6I-2T3/6I-SW2T is a specialized hardware kit designed to securely...
Cast Steel Alloy Forks from Miller Industries are used when clearance is needed on a...
The Miller 168" Bonded Winch Hose for 19' Carrier is a specialized hydraulic hose assembly...
The Miller Air Regulator Gauge Assembly is a critical component used in pneumatic systems to...
Sale
The Miller Boom Slide Assembly Pad is an essential component designed to facilitate smooth and...
This 10 Post Junction Box from Miller Industries is used on the assembly of many...
This is a 66" long subframe bearing pad by Miller Industries. It is one of...
On Order
The Miller 192" Bonded Winch Hose for 21' Carrier is a specialized hydraulic hose assembly...
On Order
This passenger side pivot-style L-Arm receiver bracket from Miller Industries attaches to the outer crosstubes...
This is a 216" long bearing pad by Miller Industries. This is a full length...
This 3" Short Fork from Miller Industries is used to pick up from the leaf...
This driver side pivot-style L-Arm receiver bracket from Miller Industries attaches to the outer crosstubes...
This OEM Factory Replacement Cable Tensioner, from Miller Industries, will keep constant pressure against your...
The 8 Foot Green Round Sling is a robust and versatile lifting tool designed for...
This is a bushing stinger. Product Dimensions: 3.5"L x 3.5"W x 2.5"H Inner Diameter: 3"...
The Miller Adapter-HDU Chain is a specialized accessory designed for use with towing and recovery...
The 16' Blue Round Sling is a heavy-duty lifting accessory designed for a wide range...
The Miller 894 Holding Valve is a specialized hydraulic component used in towing and recovery...
On Order
This Short 4-1/2" Fork from Miller Industries is used to pick up from the leaf...
The Miller Industries Cable Guard Block is a critical component used in towing and recovery...
On Order
The Miller Bearing Pad Kit for 21' Steel Body is a specialized component designed to...
The 21100 Power Actuator is a compact and robust electrical device designed for precise control...
The Miller Cable Hold Down Pivot Arm is a crucial component within towing and recovery...
This Air Cylinder from Miller Industries has a 1.5" Bore and a 1.71" Stroke. This...
The Miller Industries 176" Bonded Winch Hose - 19.5' Carrier is a top-tier hydraulic hose...
Sale
The Miller 3/4" x 3.5" T-Pin is a robust and versatile component essential in towing...
The Miller 5" x 5" Crossbar Fork Adapter Offset LH Fork Holder is a specialized...
This Miller Air Bank features 10 positions and runs on a 12V power source. It...
The Miller Bus 124002634 Lift Eye Attachment is designed for front lifts on many models...
Description The B/A Products 5/8" x 8' Super Sling Eye + Eye offers a robust...
Description The Miller 812 Trailer Ball Hitch is an essential component for safe and efficient...
Description These are Safe N' Secure round slings ranging in different colors and lengths all...
This is a Miller Industries bed lock hold-down for the passenger side on Century/Vulcan Generation...
Description Aluminum T handle, 5/8" x 1.25". Used to secure Miller Heavy Duty Wrecker Fork...
Description The Miller Ball Bearing is a high-quality component engineered to facilitate smooth and efficient...
DescriptionThis thick steel Keyhole Plate from Miller Industries has a Double Banjo Eye that will...
On Order
DescriptionThis new approach plate roller guide attachment is for 10, 12, and 16 Series Steel...
DescriptionThis Bell Crank from Miller Industries is used on the Winch Clutch Control assembly of...
DescriptionThis is a replacement Bow Tie Pin from Miller Industries. This pin is used to...
Description This 3/8" x 3/4" Button-Head Allen Screw is used on the Wheel Lift and...
Description
Miller Industries product. This is the Cam-Lok (3/4") sliders only.
This is a Miller Industries product. It's a 7 conductor strand wire that's blue (arctic).
Description This Button Head Screw from Miller Industries is used to screw the stop plates...
DescriptionThis is a replacement body harness clamp for Century, Champion, and Vulcan Car Carriers by...
Description Preserve your brakes, improve your stopping distance and maintain safety while towing heavy-duty trucks...
B/A Products Round Sling These round slings feature a Safety Factor of 5:1. The inner...
Description
The Air Free Spool Winch Solenoid is used on Century 5030 Wreckers.
Showing 159 of 50.